高效脱色絮凝剂为集脱色、絮凝、降解COD等多种功能于一身的高分子化合物。主要用于染料厂高色度废水的脱色处理，适用于活性、酸性和分散染料等废水处理，也可以用于纺织、印染、颜料、油墨、造纸、化工、焦化、养殖、皮革等工业废水的脱色处理。
【质量标准】：
1．外观：浅色和无色，粘稠液体。
2．粘度：（20℃）20—200CPS
3．PH：（30%水溶液）3-5
4．固含量：≥50%
5．密度：1.25-1.36
【使用方法】：
1、投加点：建议在沉淀池或气浮池前反应槽投加。
2、投加方式：按5-10%比例配置水溶液，用加药泵进行投加。
3、使用最佳条件：pH最佳使用条件为7-9。
4、投加辅助药剂及比例：废水的色度、COD较高时，宜将脱色剂与有机助凝剂（PAM）配合使用来处理，这样可以降低处理成本。药剂的投加顺序和投加比例应根据废水处理的实际工艺来决定。通常情况下是先加脱色剂，后加助凝剂。一般用量为50-500ppm 。
4、小试步骤：取几杯待处理水，调节pH至弱碱性（7-9），将本品稀释20倍，分别加入不同数量本品搅拌反应，形成矾花后投加PAM溶液，进行沉淀，根据脱色情况确定用量。
【安全、包装和储存】：
■ 安全：本品应避免与眼睛和皮肤直接接触。一旦接触，立即用大量清水冲洗，不可延误。人工操作应配戴防护眼镜和防酸手套。
■ 包装： 25kg/桶，或按用户要求
■ 储存：室温、避光储存，保质期一年。
The high efficiency decolorizing flocculant is a high molecular compound which integrates many functions such as decolorizing, flocculating and degrading COD. It is mainly used for the decolorization treatment of high-chroma wastewater of dyeworks, suitable for the treatment of reactive, acidic and disperse dyes, and can also be used for the decolorization treatment of textile, printing and dyeing, pigment, ink, papermaking, chemical industry, coking, aquaculture, leather and other industrial wastewater.
[Quality standard] :
1. Appearance: Light and colorless, viscous liquid.
2. Viscosity: (20℃) 20-200cps
3. PH: (30% aqueous solution) 3-5
4. Solid content: ≥50%
5. Density: 1.25-1.36
[Usage] :
1, adding point: It is recommended to add in the reaction tank before the sedimentation tank or air flotation tank.
2, dosing method: according to the proportion of 5-10% configuration of aqueous solution, dosing with dosing pump.
3, the best conditions for use: the best conditions for pH use are 7-9.
4, adding auxiliary agents and proportion: When the color and COD of the wastewater are high, it is appropriate to use the decolorizing agent with the organic coagulant (PAM) to treat, which can reduce the treatment cost. The dosage sequence and dosage ratio of chemicals should be determined according to the actual process of wastewater treatment. Usually, the decolorizing agent is added first, and then the coagulant aid is added. The usual dosage is 50-500ppm.
4, small test steps: take a few cups of water to be treated, adjust the pH to weakly alkaline (7-9), dilute the product 20 times, add different amounts of the product to stir reaction, form alum, add PAM solution, precipitate, determine the amount according to decolorization.
【 Safety, Packaging and Storage 】 :
■ Safety: Avoid direct contact with eyes and skin. Once in contact, rinse immediately with plenty of water, can not be delayed. Wear protective glasses and acid gloves during manual operation.
■ Packing: 25kg/ barrel, or according to user requirements
■ Storage: room temperature, away from light storage, shelf life of one year.
